Procedure for Unlocking:

For unlocking the locks the following steps are to be followed:

1. Installation of Dangle, Basic service software and flash files should be done first.

2. For Nokia phones unlocking Double click in Ikon "DCtx.," the Nokia Service Screen opens.

3. Connect Dangle to the system

4. Connect the phone to be serviced to the dangle by using suitable service cable.

5. Click "connect" button to establish connection from Dangle to the software. Select speed to "Normal" or "Slow" and then select phone model to be serviced.

6. For "Enter security code" problem Double Click "Reset user Lock" in UI Options (UI-user information)
OR
Alternatively select "Info" option and see the user lock (security code_ displayed. Enter the code phone will open.

7. For Network and SIM Lock Problems:
Double Click "Init... SIM Locks". After doing this the phone will function in all Networks and any Sim.

8. For Language Changed Phone:
Double-Click "UI Defaults" to change language and other settings to Default without erasing User Information.
OR
Double click "Full factory Default" to change language and other setting to Default, but user information stored in phone will be erased.

9. To confirm Hardware failure (Power Stage):
Click "Check"
Result Shows "First Boot OK" - If Hardware Ok.
Result Shows "First Boot Error" - IF Phone Hardware defective.